Lets people on limited data stop the Tankopedia from downloading 3D models automatically.
- Added an Automatically load 3D models switch to the settings page, on by default
- When off, the tank page hero shows a Load 3D model button where the loading bar sits
- Held back every model download on the tank page until requested, including the dynamic armor switcher and the gun flexibility visualizer
- Wrapped the tank sandbox in its own suspense boundary so the loading bar shows real progress instead of the whole page waiting on the model
- Measured loading progress from when each loading bar appears so it always starts empty
- Added the English strings; other languages fall back until translated
Fixes#311
Prepares BlitzKit for tier XI tanks ahead of their release. Tier X was hardcoded as the maximum in the tank search filters, the guesser and the tech tree, and had no roman numeral beyond X.
- Added `XI` to `TIER_ROMAN_NUMERALS`
- Added an awaitable tier list derived from the highest tier in the tank definitions, so nothing changes until tier XI tanks exist
- Used it for the tank search tier filters and the guesser tier picker and defaults
- Made the tech tree check for successors instead of assuming tier X is the last tier
Fixes#302
Contact shadows under the tank disappeared when the camera orbited low enough to look up at it. The shadow plane and the ground disc are both transparent and centred on the origin, so three.js sorts them by camera depth. Looking upward flips that order, and because the shadow doesn't write depth, the ground disc was drawn over it.
- Gave `ContactShadows` a `renderOrder` of 1 so it always renders after the ground disc
Fixes#299
On some browsers a thin sliver of the Insanity banner showed through along the rounded edges of the equalizer toggle, most visibly on the right where the gradient is opaque. The banner and the gradient were painted on two separately clipped elements, so their anti-aliased edges didn't line up.
- Moved the gradient onto the outer box as the top layer of its `backgroundImage`, above the banner
- Removed the separate gradient layer from the inner flex
Fixes#297
The fade flag images are 2:1 but the flag only fills the left part, with the rest transparent. That made `cover` + `center` in the tech tree node crop and offset the visible flag.
- Trim the transparent border from the fade flag in the `/flags/fade/[id].webp` route using `sharp`
- Revert the tech tree node back to `cover` + `center`, since the image is now just the flag
The filters on the playlist page stretched into one long strip beside the tank pool, squeezing the pool into the remaining space.
**Changes**
- Place the filters and the generate button in a fixed-width column (`22rem`) on medium screens and up so the filter buttons wrap compactly
- Stretch the generate button to the column width
- Let the tank pool take the remaining width
- Tighten the gap between the two columns
- Keep the existing stacked layout on small screens
Dragging a tank's track scrolled its roughness/metalness texture at twice the speed of the base color and normal textures, so highlights drifted off the track links.
**Cause**
- `translateTexture` added the scroll offset to `roughnessMap` and `metalnessMap` separately
- glTF has a single metallic-roughness texture, and the loader assigns that same texture object to both slots, so it received the offset twice
**Changes**
- Collect the track's maps in a `Set` before scrolling so a texture shared between slots is offset exactly once
Users were no longer sent to their preferred locale. `LocaleRedirector` was emptied in `115fa5aca` after its previous versions caused repeated redirects, and nothing replaced it.
**Cause**
- The earlier logic compared the best locale (a string) against the current locale entry (an object), so the check was always true on non-default locale pages
- That made the redirect fire repeatedly, which led to the logic being removed entirely
**Changes**
- Derive the current locale from the URL, treating the default locale as unprefixed to match how pages are generated
- Redirect only when the best locale differs from the current locale, so it stops after one hop
- Redirect users with a saved `preferred-locale` from any page
- Redirect users without a saved preference from default-locale URLs only, using their browser language, so shared locale links are respected
- Preserve the rest of the path when swapping the locale prefix
- Skip `/api` paths
The mixer's hull/turret/gun row is about 440px wide at its fixed sizes and is centered with `left: 50%` and `translateX(-50%)`, so on phones narrower than that it overflowed past both edges.
Use smaller button sizes on phones and scale the tank images with the viewport (`clamp(2rem, 11vw, 4em)`), with smaller separators and gaps. From 520px up the layout is unchanged.
The "Help translate BlitzKit" link on the home page had only a bottom margin, so it sat flush against the hero above while the tool grid below added extra space.
Add a top margin so the space above matches the space below, leaving the bottom margin unchanged.
Both buttons in the testing and unlocked filter pairs started on, so showing only one kind meant turning the other kind off.
Start all four filters off, treat a pair with neither button on as showing everything, and make the buttons in each pair mutually exclusive: turning one on turns its partner off, and clicking an active one turns it off. The playlist page now sets the unlocked filter on (and locked off) explicitly, since the old default no longer provides that.
The footer showed the game's full version with its build number and labelled the environment as "CDN".
Show only the part of the game version before the underscore (e.g. 11.20), and rename the "CDN" label to "Branch" since it shows the environment/branch the site was built from.
The reload visualizer and the Firepower reload rows showed two decimals.
Add an exported `RELOAD_PRECISION` (1) in the reload visualizer and use it for the visualizer's times and placeholders and for the Firepower reload rows (per-shell reloads, reload and intra-clip).
**Enter key**
- Enter redirected to the previous results' first tank while a search was still buffering, because the key handler captured a stale `searching` value.
- Enter on an empty field redirected to the first tank of the unfiltered list (Sheridan).
- The handler now reads live filter state and only acts when there is a settled search, matching the quick-link button.
**Full names in search**
- Search only knew short tank names, so queries like "super pershing" found nothing when the game stores a short form.
- Add an optional `name_full` to `TankDefinition`, filled from the game's full name when a short name exists, and index it (plus an accent-stripped copy) in `fetchTankNames` / `SEARCH_KEYS`.
- Displayed names are unchanged. Full names become searchable once the definitions are regenerated on the next build.
The hero loading bar was offset below the title by half the font size plus a fixed 16px. The title is centered as a line box, so its descenders and heavy caps reach lower than half the font size, and the fixed gap didn't grow with the title.
Offset the bar by 0.75 of the font size instead, so the gap scales with the title.
The gun flexibility visualizer at the bottom of the Tankopedia Firepower section computed depression/elevation purely from the raw gun `pitch.min`/`pitch.max` values, ignoring `initial_turret_rotation.pitch` (the tank's baked-in turret mount tilt). Every other place that reports gun depression/elevation already accounts for this offset; the visualizer was the outlier.
On tanks with a level turret mount the offset is zero, so it was invisible almost everywhere. Minotauro's turret sits pitched 3° forward, which made the visualizer's min/max/pitch stats and wedge shape disagree with the Firepower stats directly above it (e.g. 7°/-18° instead of 10°/15°).
**Changes:**
- `GunFlexibilityVisualizer/index.tsx`: fold the turret's initial pitch offset into `minPitch`, `maxPitch` and the displayed `pitch` stat, and into the drawn limit shape, the pitch dot and the pointer mapping, so the dashed neutrality circle sits at the displayed 0°.
- `GunFlexibilityVisualizer/components/CanvasContent.tsx`: nest the gun mesh inside a turret group carrying the same static tilt as its base rotation, so the mini 3D preview's live drag-pitch composes on top of it, mirroring `useTankTransform.ts`.
## Summary
- Add a Spall Liner toggle button to the Tankopedia model viewer, placed alongside the existing Calibrated Shells / Enhanced Armor buttons. It's only shown for tanks that can actually equip Spall Liner.
- The toggle reads/writes the same `Duel.protagonist.provisions` array as the Provisions tab, so both stay in sync automatically.
- If a provision slot is free, clicking equips Spall Liner immediately. If all slots are full, a popover shows icons with a shuffle arrow so you can pick which active provision to swap out in one step.
- Buttons use the same medium rounding as the consumable buttons on the tank page.
- When Spall Liner is equipped, the Dynamic Armor 3D viewer's click-damage tooltip now applies the same 20% HE damage reduction Spall Liner grants in-game.
- Refactored the hardcoded `-0.2` HE damage coefficient in `tankCharacteristics.ts` into a shared constant so the Compare tool and the 3D viewer use a single source of truth.
## Scope
This only affects the single-tank Tankopedia page. The Firepower stats table (the viewed tank's own outgoing gun damage) is intentionally untouched, since a defensive damage reduction would be semantically backwards there. The Dynamic Armor viewer's click tooltip is the only place a "damage taken by this tank" number exists, so that's where the reduction is wired in.
TrèsAbhi
Mark Greene